WB Vol.1 Multicast - 8.3 PIM Sparse Mode
R6 (Multicast Source, FHR)
(*, 224.10.10.10), 00:07:27/stopped, RP 150.7.5.5, flags: SPF
Incoming interface: FastEthernet0/0.146, RPF nbr 155.7.146.4
Outgoing interface list: Null
-> it is because no multicast receiver below R4
(155.7.146.6, 224.10.10.10), 00:02:54/00:02:56, flags: PFT
Incoming interface: FastEthernet0/0.146, RPF nbr 0.0.0.0
Outgoing interface list: Null
-> FHR does not have OIL interface??
R4
(*, 224.10.10.10), 00:08:06/stopped, RP 150.7.5.5, flags: SP
Incoming interface: Serial0/1/0, RPF nbr 155.7.45.5
Outgoing interface list: Null
-> it is because no multicast receiver below R4
(155.7.146.6, 224.10.10.10), 00:03:32/00:02:49, flags: T
Incoming interface: FastEthernet0/1, RPF nbr 155.7.146.6
Outgoing interface list:
Serial0/1/0, Forward/Sparse, 00:03:32/00:02:54
R5 (RP Router)
(*, 224.10.10.10), 00:08:41/00:02:33, RP 150.7.5.5, flags: S
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Sparse, 00:08:41/00:02:33
(155.7.146.6, 224.10.10.10), 00:01:09/00:02:24, flags: T
Incoming interface: Serial0/1/0, RPF nbr 155.7.45.4
Outgoing interface list:
FastEthernet0/0, Forward/Sparse, 00:01:09/00:03:21
SW2
(*, 224.10.10.10), 00:07:06/00:03:16, RP 150.7.5.5, flags: S
Incoming interface: Vlan58, RPF nbr 155.7.58.5
Outgoing interface list:
Port-channel1, Forward/Sparse, 00:07:06/00:03:16
(155.7.146.6, 224.10.10.10), 00:00:20/00:03:09, flags:
Incoming interface: Vlan58, RPF nbr 155.7.58.5
Outgoing interface list:
Port-channel1, Forward/Sparse, 00:00:20/00:03:16
SW4 (Multicast Receiver, LHR)
(*, 224.10.10.10), 00:07:52/stopped, RP 150.7.5.5, flags: SJCL
Incoming interface: Port-channel1, RPF nbr 155.7.108.8
Outgoing interface list:
Vlan10, Forward/Sparse, 00:07:52/00:02:20, H
(155.7.146.6, 224.10.10.10), 00:00:08/00:02:59, flags: LJT
Incoming interface: Port-channel1, RPF nbr 155.7.108.8
Outgoing interface list:
Vlan10, Forward/Sparse, 00:00:09/00:02:50, H
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home